Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they don't get rusty or decay.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, making it very hazardous and possibly fatal. It is important to take the time to ensure that you're doing everything you can to ensure that your windows are in good repair.

For single pane windows it can be relatively simple to replace them, and the replacement will generally fit within the old frame very easily. However when windows with double panes are held in place by internal beading, it will be more difficult to take out the panes that are in place and replace them with new ones. In this case, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the glass so that any shards will fall onto the cloth instead of landing on the floor where they could be trodden under and cause further damage.

Once the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to stop drafts and water from entering the home until a professional comes out and fix the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap is large, you may be interested in a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. In time, they could develop a variety of issues such as sliding. A sagging window can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from getting worse.

Repositioning the hinges can help fix a window that is sliding. To do this, you'll have to open the window to access the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and test it for fitting. If you are happy with the size of the window, tighten the screws to keep them in place.

If you are unable to move the hinges, you could have to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to loose their elasticity. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows are watertight and safe from drafts.

UPVC handles can also become loose. This is usually due to screws that have loosened over time, but it could also be caused by the handle mechanism wearing out. It's relatively simple to repair a loose uPVC handle. The first step is to close your window and do a test fit. The corner joints of the sash should be aligned with the casing joint. If it isn't then you can use a screwdriver to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

It is crucial to take action if get up each morning to discover mouldy walls and floors that are wet. Water leaks from windows can not only cause degradation of your home's structure but also hinder your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be completed by any skilled DIYer. Depending on how severe the problem is, the old caulking might need to be removed. When it is time to uPVC repair, you should avoid over-caulking. This will only make your window more difficult to clean and lower its energy efficiency.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotten sills are other signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely the issue is related to the seal, not the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and open with ease It could be the hinges that are at fault. Any competent DIYer can replace these in a matter of minutes.

Like all mechanical parts hinges are prone to wear out over time. It is essentially a simple procedure, but it is easier to do if you have someone to assist in holding the frame in place.

Check that the uPVC hinges open and close in the correct direction. You can do this by looking for the arrows on each hinge. This indicates which way the window should open.

Faulty window hinges can be caused by incorrectly opening the window in a certain way or by poor installation at the factory. This can often be resolved by sending us a photo through our website and we will be more than happy to give you advice.

Regular lubrication of the hinges is also necessary. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It also decreases the possibility of a window sticking and help prevent corrosion. The ideal time to do this once a more info year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different things. First, the hinges due to wear and tear could become misaligned. This causes an opening to appear between the sash and the frame. If they are damaged beyond repair, it might be necessary to have them realigned. The interlock, which is located on the hinge side of the window, can also become misaligned, again it's possible to just give them a thorough clean, however in certain cases, it may be necessary to have these replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures and decrease draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be placed over your window sill. They can help stop cold air from entering and keep your home warm and cosy!

With a bit of regular maintenance and repairs your windows made of upvc will continue to provide a great level of insulation and security for your home. It is important to remember that all windows will eventually become worn out, and it could be more cost-effective to replace them than to repair them. If you are experiencing issues with your Upvc window it is recommended to speak with a professional as soon as you can.